- Home
- Equipment
Refine by
Fit Bearings Environmental Equipment & Supplies
7 equipment items found
Manufactured by:FIT Bearings based inFremont, CALIFORNIA (USA)
Mast guide bearings are designed for heavy load carrying capacities in forklift applications. Heavy radial and thrust loads are experienced in the mast of a forklift. Mast guide bearings have heavy section outer rings, which act as rollers and guides for the carriage in the mast channels. This is designed to fit the contour of the mast channel, and helps to prevent misalignment. It also ...
Manufactured by:FIT Bearings based inFremont, CALIFORNIA (USA)
Rod ends are used for linkage applications where a bearing must accommodate misalignment. They are available in both male and female threaded shanks, in left or right hand threads, and in self-lubricating or relubricating designs. There are three construction types: four piece, two piece, and cartridges. Grades consist of commercial, precision, and construction. Commercial rod ends provide low ...
Manufactured by:FIT Bearings based inFremont, CALIFORNIA (USA)
Tapered roller bearings are used to carry combined axial and radial loads in which the radial load is predominant. These bearings are of separable design, i.e. the rollers retained by the cage, constituting an assembly with the inner ring, can be separated from the outer ring. The outer rings are interchangeable. The axial clearance can be slightly adjusted during mounting and operation. ...
Manufactured by:FIT Bearings based inFremont, CALIFORNIA (USA)
Radial ball bearings are the most widely used type of bearings. They are simple in design and require little attention in operation. Primarily used to carry radial loads, they can also take considerable axial loads from both directions. When mounted on a shaft, they are capable of restricting the relative displacement of the shaft or housing within the axial clearance limit of the ...
Manufactured by:FIT Bearings based inFremont, CALIFORNIA (USA)
Split Housing Assemblies (plumber blocks) are the most commonly used blocks in manufacturing, mining, and construction industries for mounting self-aligning ball or spherical roller bearings with adapter sleeves or cylindrical bores. They are designed for use on conveyors, dryers, road building equipment, run-out tables, fans, crushers, hammer mills, and many other high-precision, heavy duty ...
Manufactured by:FIT Bearings based inFremont, CALIFORNIA (USA)
Spherical roller bearings have two rows of spherical rollers running on two raceways in the inner ring, and a common spherical raceway in the outer ring. This construction allows the bearing to internally self-align and permits minor incoaxiality of the shaft relative to the housing. This type of bearing is designed mainly to take heavy radial loads. Although it can also take axial loads in both ...
Manufactured by:FIT Bearings based inFremont, CALIFORNIA (USA)
FIT mounted units consist of a deep groove ball bearing insert and housing. Insert bearings are sold separate from housings for replacement ...